P2255
O2 Sensor Negative Current Control Circuit Low (Bank 2 Sensor 1)
P2255 reports that the negative current control line (reference ground) of the bank 2 upstream wide-band sensor reads too low, typically a short to ground. No manufacturer publicly documents P2255 with thresholds. Ford's OBD summaries assign shorts to ground on any wide-band sensor line to P0151 and use P2254 only for an open line, and VW's 2014 specification books likewise list only P2254. The code therefore appears mainly where the sensor interface separates short-circuit faults by line. CARB requires circuit and out-of-range faults of fuel-control sensors to be detected and, where feasible, stored as separate codes. P2252 is the bank 1 counterpart, P2256 the high-side fault. Mixture control on bank 2 becomes unreliable.
Possible causes
- Reference ground wire shorted to ground (chafed against exhaust or body) high
- Internal fault in the wide-band sensor medium
- Fault in the sensor interface of the ECM low
Symptoms
- Check engine light
- Higher fuel consumption
- Possible hesitation or uneven running
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2255
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.