OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P224E

Alternative Fuel Tank Shutoff Valve A Control Circuit Low

P224E sets when the control line of tank shutoff valve A reads too low. The DTC list of CNG upfitter TransEco Energy for its alternative fuel control module (AFCM v1.4) blames the line touching ground or being interrupted, turns on the MIL in both dedicated and bi-fuel setups and lets the system keep operating normally rather than forcing a fallback. The same list uses P2A24 and related numbers for valves B to E. Ford's own Boss 302S code list also contains P224E. On a normally closed valve such as the one on GM's bi-fuel Impala, a grounded control wire may keep the solenoid from switching as intended. P224F is the high side, P224C the general open circuit. Gas lines must stay sealed during wiring repairs.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 4E

Possible causes

  • Control wire of the tank valve chafed through to ground high
  • Open circuit, which some modules report under this code medium
  • Shorted solenoid coil in the valve low

Symptoms

  • Check engine light
  • Gas operation unavailable or interrupted

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P224E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication