OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P224D

Alternative Fuel Tank Shutoff Valve A Control Circuit Performance/Stuck Off

P224D means tank shutoff valve A is electrically switched but the system behaves as if it stayed shut. Software can only infer that from a pressure response: once the valve is commanded open, line or rail pressure should climb toward the regulated value, which GM gives as 468-896 kPa for the bi-fuel Impala and Ford as about 724 kPa for its 2003 CNG trucks. Ford's control module also closes the tank valve itself if gas pressure sinks under 517 kPa. No maker documents P224D publicly; some code lists call it Range/Performance instead of Stuck Off. Possible reasons are a seized plunger, a closed manual tank valve or an empty tank. Bi-fuel vehicles return to gasoline, dedicated ones lose power or stall.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 4D

Possible causes

  • Manual tank valve closed or tank nearly empty medium
  • Valve plunger stuck closed, e.g. by contamination medium
  • Supply voltage too low to pull the solenoid open low
  • Faulty gas pressure sensor misreporting the response low

Symptoms

  • Check engine light
  • Engine switches back to gasoline or will not run on gas
  • Gas fuel gauge shows content although no gas is delivered

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P224D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication