OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P224C

Alternative Fuel Tank Shutoff Valve A Control Circuit/Open

P224C points to an open or otherwise faulty control circuit of shutoff valve A, the solenoid on a CNG or LPG tank that releases gas only when the engine runs on the alternative fuel. Such valves are normally closed. GM's 2015 bi-fuel Impala (bulletin PI1330) fits a high-pressure cut-off solenoid to the tank and energizes it in CNG mode while the engine cranks or runs; Ford's 2003 bi-fuel CNG documentation feeds its tank valve through the inertia switch and the ALT fuel relay. Neither publishes codes for the valve. No maker documents P224C publicly, and the CNG upfitter TransEco even files an open circuit under P224E. With the valve dead, bi-fuel cars carry on with gasoline; dedicated gas vehicles may not start.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 4C

Possible causes

  • Broken wire or unplugged connector at the tank valve high
  • Solenoid coil of the valve open medium
  • Supply interrupted by relay or tripped inertia switch low

Symptoms

  • Check engine light
  • Vehicle will not switch to gas operation or falls back to gasoline

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P224C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication