OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2248

O2 Sensor Reference Voltage Performance (Bank 2 Sensor 1)

P2248 is meant for a reference voltage signal on the bank 2 upstream wide-band sensor that is present but implausible, as opposed to an open or shorted line. No manufacturer documents P2248 publicly, and the published diagnostic tables of Ford, GM, Saab and VW cover the bank 2 Nernst-cell line only with the open-circuit code P2247, while Ford routes shorts to P0151/P0152. A drifting reading usually stems from an aged or poisoned sensor element or extra resistance in the circuit, which Bosch's 300-ohm nominal cell value makes measurable. CARB requires upstream sensors to be monitored for out-of-range and implausible output. P2244 is the bank 1 counterpart, P2247 the open line, P2249/P2250 low/high. Mixture control on bank 2 becomes less accurate.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 48

Possible causes

  • Aged or contaminated wide-band sensor on bank 2 high
  • High resistance in the reference voltage wire or connector medium
  • Exhaust leak ahead of the bank 2 sensor low

Symptoms

  • Check engine light
  • Slightly higher fuel consumption
  • Possible failed emissions test

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2248

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication