OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2247

O2 Sensor Reference Voltage Circuit/Open (Bank 2 Sensor 1)

P2247 is the bank 2 version of P2243: the Nernst-cell reference line of the upstream wide-band sensor on the second cylinder bank is open. Ford's summaries trip it on Bosch sensors after 10 s outside 0.2-4.7 V and on NTK sensors via the interface chip, replacing the older P0150. VW's 2014 Touareg book names it an open Nernst-voltage circuit with limits of 0.25 and 4.80 V, while GM's 2005 V6 tables call it Type B. Field cases include Honda bulletin 14-002 (2010-11 V6 models, broken sensor tip, usually with P0430), Jaguar Land Rover LTB00671 (2014-16 3.0 supercharged V6, water shock) and a 2025 Ram 1500 3.0 engine software update (FCA 18-071-26). P2243 is bank 1, P2249/P2250 the low/high faults, P2254 the open ground line on bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 47

Possible causes

  • Broken reference voltage (Nernst cell) wire or loose pin on the bank 2 sensor high
  • Cracked element or broken sensor tip after thermal shock medium
  • Engine software that sets the code falsely (update for some models) low

Symptoms

  • Check engine light
  • Higher fuel consumption from open-loop fuelling on bank 2
  • Catalyst efficiency code P0430 if a sensor fragment damaged the converter

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2247

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication