OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P223C

O2 Sensor Pumping Current Range/Performance (Bank 1)

P223C judges whether the pump current of the bank 1 wide-band sensor makes sense while the engine is coasting with fuel cut off. In that state the sensor sees almost pure air and, as Bosch's LSU 4.9 data show, must drive a clearly positive current. GM's tables (2016, 2018, 2019) start the test after 5 s of fuel cut-off and stop it at 12 s, with the reference cell above about 600 °C. Three windows count as faulty: current too large (above 5.0 mA, or 4.18 mA with the Delphi interface), close to zero (within ±0.3 or ±0.1 mA), or negative (below -0.10 mA). Each window has its own counter, e.g. 40 failures in 160 samples at 25 ms; the code is Type B. GM notes that it also catches open pump, reference-cell and reference-ground circuits. P223D is bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 3C

Possible causes

  • Aged or poisoned wide-band sensor with wrong pump current in air high
  • Open pump-current, reference-cell or reference-ground wire medium
  • Exhaust leak or misfire that distorts the gas at the sensor low

Symptoms

  • Check engine light after two drives
  • Usually no noticeable change in driving behaviour

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P223C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication