P223B
Reductant Heater F Control Circuit
P223B reports a fault in the control circuit of heater F, the sixth heating element of an SCR system. Like its neighbour P223A for heater E, it is a single catch-all code covering open lines and shorts alike. No maker documents P223B publicly, and the published systems show why: Ford's 2023 diesel summary names heaters A to C only (with A and B checked at peak heating power for under 3 A at more than 5 V), and GM bulletin 21-NA-149 lists the heater D codes P20C5 and P20C8 for the 3.0 L LM2 Duramax. Six zones would only appear on layouts with many separately heated lines or tanks. CARB requires every emission-relevant output to be checked for circuit faults. Expect an SCR warning and, in winter, the risk of a frozen line that ends in reduced power.
Possible causes
- Damaged wiring or corroded connector of heater F high
- Heating element F open or shorted medium
- Missing supply from the heater relay or fuse low
Symptoms
- Check engine light and SCR warning
- Reduced power warning after a cold-weather DEF fault
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P223B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.