OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2239

O2 Sensor Positive Current Control Circuit High (Bank 1 Sensor 1)

P2239 is the high-side counterpart for the pump-current circuit of the bank 1 front wide-band sensor. On the Saab 9-5 2.0 turbo (2010) it sets when, in closed loop with the mixture deliberately enriched, the signal still sits at 1.48-1.51 V for 1 s, meaning the sensor ignores a change it should report; it is a Type B code. GM's 2005 V6 tables check a similar window (1.48-1.52 V while target lambda lies outside 0.97-1.03) under P2237. Mitsubishi's 2022 Outlander also lists P2239 as a two-trip code. Ford files this wire touching battery voltage under P0132 instead. A short to the heater supply can overload the sensor interface, so the wiring deserves a check before a new sensor goes in. P2238 is low, P2242 bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 39

Possible causes

  • Pump-current wire shorted to heater supply or battery voltage high
  • Wide-band sensor with internal short or stuck output medium
  • Damaged sensor interface in the ECM low

Symptoms

  • Check engine light after two drives
  • Lambda reading frozen near 1.0 regardless of load
  • New sensor fails again quickly if the wiring short is not found

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2239

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication