OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2237

O2 Sensor Positive Current Control Circuit/Open (Bank 1 Sensor 1)

P2237 points to an open pump-current line (IP or APE) on the front wide-band sensor of bank 1. With that wire broken the output freezes near its stoichiometric value of roughly 1.5 V and lambda stops moving. Ford sets it on Bosch sensors when 20 s of fuel-control steps and reference-current pulses shift lambda by 0.05 or less; NTK interface chips report the open line directly. VW's 2014 books look for 1.49-1.51 V while the lambda controller deviates by more than 0.10 or fuel has been cut for over 3 s, and Saab's 9-5 2.0 turbo (2010) logs it as Type B. Software updates cure false or damaging cases on VW Jetta/Beetle 2.0 (2013-14, plus a new sensor) and Hyundai Kona 1.6 T-GDI (2024-25). P2238/P2239 are low/high, P2240 is bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 37

Possible causes

  • Broken pump-current wire or pushed-back pin between sensor and ECM high
  • Pump cell of the wide-band sensor damaged, for example by catalyst-heating strategy or thermal shock medium
  • Engine software that sets the code falsely (update available for some models) low

Symptoms

  • Check engine light
  • Lambda reading stuck at 1.0 in live data
  • Higher fuel consumption in open-loop fuelling

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2237

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication