P222E
Barometric Pressure Sensor B Circuit Intermittent/Erratic
P222E catches a sensor B signal that jitters. Outside air pressure changes slowly, so GM measures noise directly: every 12.5 ms the difference to the previous reading is taken, and the absolute differences over 80 consecutive readings are added up into a so-called string length. If that total exceeds 100 kPa, the one-second sample counts as failed; four failures in five samples set the code as Type B, MIL after two trips. GM uses this in the 2018 tables for the 3.0 L LGW and in a 2016 engine family. The fault differs from P222C/P222D, where the voltage sits steadily outside its limits, and from P222B, where a smooth signal shows the wrong value. Loose pins, chafed wires and electrical interference are the usual suspects.
Possible causes
- Loose or corroded terminal at sensor B or the ECM high
- Chafed wire with intermittent contact medium
- Electrical interference, for example from a poorly grounded component nearby low
Symptoms
- Check engine light that may come and go
- Second barometric value jumping on the scan tool
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P222E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.