P222C
Barometric Pressure Sensor B Circuit Low
P222C flags a sensor B voltage that has dropped too low, as with a signal wire touching ground. GM's 2018 tables for the 3.0 L LGW set the code below 40 % of the 5 V range, equal to about 50.9 kPa, counted in 320 of 400 readings taken every 12.5 ms; it is a Type B fault with the MIL after two trips. GM's 2023-2024 tables for a twin-throttle engine use the pressure value itself: below 50 kPa for 2 s. In GM software the fault bundle for ambient pressure sensor 2 covers exactly P222C and P222D, which tells which sensor letter B refers to there. Compared with sensor A (P2228), the circuit is separate, so sensor A keeps working. P222D is the high-voltage counterpart, P222B the plausibility check.
Possible causes
- Signal wire of sensor B shorted to ground high
- 5 V reference to sensor B open or shorted medium
- Sensor B internally defective low
Symptoms
- Check engine light
- Scan tool shows a very low reading for the second barometric sensor
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P222C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.