P222B
Barometric Pressure Sensor B Circuit Range/Performance
P222B means sensor B delivers a clean signal whose value is wrong. GM documents two strategies. On the 3.0 L LGW (2018) and a 2016 engine family the ECM estimates outside pressure from boost pressure, airflow and rpm while driving; sensor B fails if it deviates by more than 20 kPa, or 25 kPa once more than 1.24 miles have passed since the last update. With the engine stopped for over 10 s, B must sit between 50 and 115 kPa, and if MAP, boost and BARO A agree within 10 kPa while B is further away, B is singled out. Both run as Type B over 320 of 400 readings. On GM's 2023-2024 twin-throttle engine, sensor B measures ahead of the bank 2 throttle and is checked against ambient pressure for 2 s.
Possible causes
- Sensor B reading with offset or stuck at one value high
- Leak or restriction in the intake path that distorts the comparison medium
- Boost or manifold pressure sensor fault affecting the estimate low
Symptoms
- Check engine light after two drives
- Usually no driveability change
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P222B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.