P222A
Barometric Pressure Sensor B Circuit
P222A is the general circuit code for a second barometric pressure sensor, B. Only some engines carry one. GM's tables for the 3.0 L twin-turbo V6 (LGW, 2018) and for 2023-2024 twin-throttle engines monitor such a sensor B, but they report its circuit faults with the more specific codes P222C (low) and P222D (high) and do not use P222A. No maker documents P222A publicly. Read it as an unspecified electrical fault of sensor B, comparable to P2226 for sensor A, which Ford now stores with a failure-type byte that tells the type of fault. CARB requires circuit monitoring of every input sensor used by an emission-relevant function. Check wiring, connector and the 5 V supply; the engine usually keeps running on sensor A or a model value.
Possible causes
- Damaged wiring or corroded connector at sensor B high
- Barometric pressure sensor B defective medium
- Fault in the shared 5 V sensor supply low
Symptoms
- Check engine light
- Usually no noticeable change in how the engine runs
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P222A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.