OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2229

Barometric Pressure Sensor A Circuit High

P2229 reports a barometric sensor A voltage above anything plausible for outside air. Ford's gasoline engines judge more than 4.4 V, an altitude below -1,000 ft, over 5 s; the 2023 diesels use 4.85 V (115 kPa) after 0.5 s. GM's 2018 diesel tables look for contact with a voltage source: over 94.1 % of the 5 V range (115.1 kPa) in 320 of 400 readings, Type B. Mazda bulletin 01-008/20 shows a less obvious cause on the 2018-2020 Mazda6 2.5 turbo: the BARO sensor lives inside the PCM and breathes through a filter hole on its underside. Wax sprayed into the engine bay can seal that hole, so the trapped air builds pressure as the PCM heats up. Mazda replaces the PCM with a reshaped bracket. Ford's 2024 software reports P2226-17 instead; P2228 is the low counterpart.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 29

Possible causes

  • Breather filter of a PCM-internal BARO sensor clogged (e.g. engine-bay wax, Mazda 01-008/20) medium
  • Signal wire of an external sensor shorted to 5 V or battery voltage medium
  • Internal fault of the sensor or the control module low

Symptoms

  • Check engine light, often only after the engine bay has heated up
  • Auto start-stop deactivated
  • Scan tool shows barometric pressure far above the real value

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2229

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication