P2226
Barometric Pressure Sensor A Circuit
P2226 is the general circuit code for barometric pressure sensor A, the sensor that tells the engine computer the outside air pressure for air-charge, fuel and boost calculations. Ford's OBD summary for 2024-2025 gasoline engines shows how the code appears in current software: every BARO fault is reported as P2226 plus a failure-type byte, -16 for a low voltage (formerly P2228), -17 for high (P2229), -92 for a plausibility error (P2227) and -1F for an erratic signal (P2230). The same list makes all four block auto start-stop. On Ford gasoline engines the sensor sits on the PCM circuit board. A plain P2226 without failure type is rare; sensor B has its own family from P222A. Expect the warning light and a default pressure value.
Possible causes
- Fault of the barometric sensor built into the engine control module medium
- Damaged wiring or loose connector on an external BARO sensor medium
- 5 V reference supply of the sensor pulled down by another faulty sensor low
Symptoms
- Check engine light
- Auto start-stop no longer works
- Failure-type suffix (-16, -17, -92, -1F) shown with the code on newer scan tools
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2226
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.