P2224
NOx Sensor Heater Sense Circuit High (Bank 2)
P2224 is logged when the heater sense signal of the bank 2 NOx sensor is too high, which the electronics sees as a short to supply voltage or as an interrupted heater reading near infinite resistance. The bank 2 code appears in no public manufacturer document. GM documents the bank 1 version P2211 for the 3.0L LZ0 as an HTemp pin shorted toward supply: 80 failed of 160 samples, powertrain relay above 11 V, sensor bus relay switched on, Type B over two trips. Since the sensor module cannot judge cell temperature, it holds back its NOx value and SCR control for that bank falls back on modelled emissions. P2223 is the low direction, P2220 a high fault on the control side, P2225 a sporadic sense fault.
Possible causes
- Heater element in the bank 2 probe open, read as maximum resistance high
- Sense lead shorted to a voltage source medium
- Fault in the sensor module input stage low
Symptoms
- Malfunction indicator lamp on after two trips
- Bank 2 NOx sensor stays unready
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2224
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.