P2223
NOx Sensor Heater Sense Circuit Low (Bank 2)
P2223 indicates that the heater sense line of the bank 2 NOx sensor sits at or near ground potential, so the electronics reads an impossibly low value for heater resistance. A sense conductor rubbed through to the exhaust bracket or a shorted measuring input inside the sensor module are the usual explanations. No manufacturer publishes the bank 2 code. For bank 1, GM's 3.0L LZ0 tables carry the equivalent P2210 as a grounded HTemp pin, judged on 80 failed of 160 samples with the powertrain relay above 11 V, Type B, so the MIL waits for a second trip. With no usable feedback the sensor cannot hold its working temperature. P2224 is the opposite polarity, P2219 a low fault on the control side.
Possible causes
- Sense lead of the bank 2 sensor shorted to ground high
- Shorted measuring input in the sensor module medium
- Water ingress in the connector low
Symptoms
- Malfunction indicator lamp on after two trips
- No valid NOx value from bank 2
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2223
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.