P2221
NOx Sensor Heater Sense Circuit (Bank 2)
Alongside the heater drive, a NOx sensor has a sense path that tells the electronics how the heater is really behaving, usually by measuring its resistance, which tracks cell temperature. P2221 reports a general fault in that sense circuit on the bank 2 sensor. Public documentation exists only for the bank 1 code P2208: GM's 3.0L LZ0 checks the separate HTemp pin for an open load, 80 failures in 160 samples at over 11 V, Type A with the MIL after one trip, and notes that its Continental sensors debounce electrical faults internally for 1.5 s. No manufacturer lists the bank 2 version. Without valid feedback the sensor cannot regulate its temperature. P2222 to P2225 are the specific sense faults.
Possible causes
- Fault in the heater measurement of the bank 2 sensor high
- Open sense conductor between probe and sensor module medium
- Corrosion in the sensor connector low
Symptoms
- Malfunction indicator lamp on
- Bank 2 NOx sensor not ready
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2221
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.