OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P221E

Reductant Heater C Current Too Low

P221E says DEF heater C pulls too little current while commanded on. Which element is C depends on the system. In GM's 2025 Duramax tables heater 3 is a second tank heater; the code needs a PWM command above zero and trips under 0.75 A after 40 readings taken every 0.1 s, a Type A fault with the MIL after one trip. GM's 2014 tables for the 6.6L LML gave the letter to the heater in the supply (pump) module instead: conductance of 0.14 S or less, checked once per trip with the battery at 11 V or more, Type B. Ford's 2023 diesel summary has a heater C only with a supply voltage check (P20C2) and does not list P221E. In frost the thawing of DEF around that heater is slow. P221F is the high-current partner, P20C1 the open control circuit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 1E

Possible causes

  • Heater C element open or burnt (tank or supply module, by system) high
  • Corroded or wet connector at the tank or pump unit medium
  • Heater supply missing (fuse, relay, harness) low

Symptoms

  • Malfunction indicator lamp on
  • Slow DEF thawing in cold weather, dosing starts late

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P221E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication