P221C
Reductant Heater B Current Too Low
P221C reports that heater B of the DEF system draws too little current while switched on. GM and Ford both assign B to the heated pressure line that carries DEF to the dosing valve. GM's 2025 Duramax tables flag line heater current under 0.75 A with a PWM command above zero, 40 faulty readings spaced 0.1 s apart, Type A with the MIL after one trip. Ford's 2023 diesel summary watches heater B continuously while it runs and decides within 2.2 s: below 3 A with more than 5 V supplied, line power below 1 W or lower than expected. GM's 2014 tables for the 6.6L LML judged conductance instead (0.28 S or less), Type B. An open or burnt line heater is the usual find; P221D is the high-current partner.
Possible causes
- Heating element in the DEF pressure line open or burnt high
- Corroded or loose connector at the heated line medium
- Missing heater supply (fuse, relay or harness) low
Symptoms
- Malfunction indicator lamp on
- DEF line may freeze in winter, dosing starts late
- DEF system warning, inducement possible if unresolved
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P221C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.