P2217
NOx Sensor Circuit Intermittent (Bank 2)
P2217 describes a bank 2 NOx sensor whose measuring path fails only now and then: the reading drops out or the sensor briefly reports an electrical error, then recovers. A smart NOx sensor evaluates its own probe lines and sends status flags for open or shorted circuits alongside the value over CAN; flags that toggle point to this code rather than to the steady fault P2213. No manufacturer documents P2217, nor its bank 1 twin P2204, with thresholds, so the debounce logic is calibration-specific; CARB generally requires continuous detection of NOx sensor continuity faults. Typical causes are a loose terminal, a lead that cracks when hot, or water entering the connector. The warning lamp may come and go.
Possible causes
- Loose or corroded terminals at the bank 2 sensor connector high
- Lead near the exhaust cracked by heat or vibration medium
- Sporadic fault in the sensor module electronics low
Symptoms
- Malfunction indicator lamp that comes and goes
- Bank 2 NOx value briefly invalid in live data
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2217
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.