P2216
NOx Sensor Circuit High (Bank 2)
P2216 is set when the NOx concentration reported for bank 2 exceeds anything the engine could plausibly emit. It belongs to engines with an SCR line per cylinder bank; none of the documented diesels is built that way, and no manufacturer lists P2216 publicly. The bank 1 code P2203 shows what such a check looks like: GM trips at 1,500 or 2,500 ppm on the 6.6L LML and at 2,500 ppm on the 3.0L LZ0 (Type B, two trips), VW at 1,655 ppm on the 2014 Touareg TDI. An overreading probe can make the dosing controller inject too much DEF, risking ammonia slip, so the reading is discarded. Internal sensor failure is the most frequent reason. P2215 is the low limit, P2214 a believable but wrong value.
Possible causes
- Bank 2 NOx sensor reading too high due to internal failure high
- Sensing element fouled by oil ash or DEF crystals medium
- Calibration error in the engine or dosing control software low
Symptoms
- Malfunction indicator lamp on
- Implausibly high NOx value for bank 2 in live data
- SCR efficiency codes may follow
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2216
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.