P2215
NOx Sensor Circuit Low (Bank 2)
P2215 says the NOx value transmitted for bank 2 falls below the smallest figure a healthy sensor can deliver. Because smart NOx sensors talk over CAN, the limit is a concentration in ppm, not a wire voltage. No manufacturer publishes this bank 2 code; the diesels on record send both banks through one SCR system and use P2202 instead. Those bank 1 limits give the scale: GM's 6.6L and 3.0L Duramax flag readings below minus 90 ppm (on the LZ0 only after the dew point is reached, Type B over two trips), VW's 2014 Touareg TDI below minus 105 ppm. A strongly negative value usually comes from a drifted element or a fault inside the sensor electronics. P2216 is the high limit, P2213 the general circuit fault.
Possible causes
- NOx element of the bank 2 sensor drifted low high
- Fault in the measuring electronics of the sensor module medium
- Damaged lead between probe and sensor module low
Symptoms
- Malfunction indicator lamp on
- Negative NOx value for bank 2 in live data
- DEF dosing switches to a substitute strategy
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2215
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.