OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2214

NOx Sensor Circuit Range/Performance (Bank 2)

Under J2012, P2214 is the plausibility fault of the bank 2 NOx sensor: wiring intact, reading not credible. No maker uses it that way in public documents. Hino does use the number differently: on its J08E inline six (Hino 238, 258, 268 and 338 conventional models, 2011 to 2016) P2214 belongs to NOx sensor 2 behind the SCR catalyst. Hino bulletin SB-14-029 first checks DEF concentration (31.8 to 33.2 percent), exhaust leaks, temperature and airflow sensors and the dosing injector, then re-tests at a steady 45 to 50 mph after a regeneration. SB-15-038 and SB-16-002 link P2214 and P2201 to NOx heater elements cracked by condensation and add DCU software. For a real bank 2 sensor, P2201 logic applies (VW: 60 percent deviation).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 14

Possible causes

  • Aged or poisoned NOx element reading with offset or slow response high
  • Sensor heater cracked by condensation (Hino 2015-2016, SB-15-038/SB-16-002) medium
  • Diluted DEF or faulty dosing injector distorting the NOx reading medium
  • Exhaust leak upstream of the sensor low

Symptoms

  • Malfunction indicator lamp on
  • Often stored with P2201 or SCR efficiency code P20EE
  • Higher DEF consumption or SCR warning

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2214

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication