OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P220D

NOx Sensor Supply Voltage Circuit (Bank 2 Sensor 2)

P220D covers the last position in this group: the downstream NOx sensor on bank 2, after that bank's own SCR catalyst, has a supply voltage outside its window. It only exists on engines whose two banks keep separate aftertreatment, which none of the publicly documented diesel applications do; no manufacturer lists the code with thresholds. Ford's bank 1 rear sensor code P220B uses 8.5 to 16.5 V, a useful reference. A dead rear sensor means the efficiency monitor for the bank 2 catalyst cannot finish. CARB requires NOx sensor diagnostics to catch wiring breaks and readings beyond range. P220C is the upstream sensor on the same bank, P220B the rear sensor on bank 1. Check supply fuse, ground and connector first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 0D

Possible causes

  • Supply fuse, relay or ground fault for the bank 2 rear sensor high
  • Corroded connector exposed to road spray behind the catalyst medium
  • Internal fault in the supply stage of the sensor module low

Symptoms

  • Malfunction indicator lamp on
  • SCR efficiency monitor for bank 2 not completed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P220D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication