P220C
NOx Sensor Supply Voltage Circuit (Bank 2 Sensor 1)
P220C is reserved for an engine with a separate exhaust path per cylinder bank, each with its own NOx sensors, and reports that the upstream sensor on bank 2 is not getting a proper supply voltage. No manufacturer documents this code publicly; the diesel pickups and trucks examined (Ford, GM, VW, Volvo/Mack) merge both banks into one SCR line and only use the bank 1 codes. By analogy with P220A, a fault would mean the supply sits outside a window like Ford's 8.5 to 16.5 V, or the supplying module reports a short. Smart sensors send their supply status over CAN, so the engine computer learns it from the sensor itself. Check fuse, relay, ground and wiring for that bank. P220D is the downstream sensor on bank 2.
Possible causes
- Fuse, relay or ground fault in the bank 2 sensor supply high
- Supply wiring to the bank 2 upstream sensor damaged medium
- System voltage out of range (battery or alternator) low
Symptoms
- Malfunction indicator lamp on
- No NOx value from the bank 2 upstream sensor
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P220C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.