P2208
NOx Sensor Heater Sense Circuit (Bank 1 Sensor 1)
Besides the control line, the NOx sensor heater has a sense or feedback path through which the controller checks how the heater actually responds (current, resistance or element temperature). P2208 marks a general fault in this sense circuit of the upstream sensor on bank 1. GM calls it NOx Sensor Heater Feedback Circuit (3.0L LZ0 diesel); Volvo and Mack class P2208 on the inlet sensor as a sensor failure that requires replacement. CARB demands heater performance monitoring within the supplier's limits. P2209 is the plausibility check of the same feedback, P2210/P2211 low or high values, P2212 dropouts; P2205-P2207 concern the control side. MIL on, driveability normal.
Possible causes
- Internal fault in the NOx sensor or its control unit high
- Damaged wiring between sensor element and sensor control unit medium
- Water ingress in the connector low
Symptoms
- Malfunction indicator lamp on
- NOx sensor reports no valid value
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2208
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.