OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2207

NOx Sensor Heater Control Circuit High (Bank 1 Sensor 1)

P2207 is the high-side counterpart of P2206: the heater control circuit of the upstream NOx sensor on bank 1 shows a voltage that is too high for the commanded state, typically an open heater element or a short to supply voltage. CARB requires the diesel OBD system to flag such circuit faults that contradict the command. GM lists P2207 as NOx Sensor Heater Control Circuit High for the 2024 Silverado/Sierra 3.0L diesel (LZ0). Without heating the sensor never becomes ready, so SCR dosing runs without NOx feedback. P2205 is the general heater circuit code, P2206 the low side, and P2208-P2211 concern the heater feedback circuit. P22A5 is the same fault on sensor 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 07

Possible causes

  • Heater element inside the NOx sensor burnt open high
  • Open circuit or short to voltage in the heater wiring medium
  • Loose or heat-damaged connector low

Symptoms

  • Malfunction indicator lamp on
  • NOx readiness or SCR efficiency faults may follow

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2207

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication