OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2205

NOx Sensor Heater Control Circuit/Open (Bank 1 Sensor 1)

The ceramic element of a NOx sensor only measures once its built-in heater has brought it to several hundred degrees. P2205 reports a break on the heater control side of the upstream sensor on bank 1. GM's 6.6L Duramax (LML) sets it after the sensor has reported an open heater for over 10 s with at least 11 V; on the 3.0L LZ0 it is an open load on the heater control pin. Both are Type A, so the MIL comes on after one trip. Volvo and Mack treat P2205 on the inlet sensor as a probable sensor failure, and GM bulletin 24-NA-094 lists it for an LZ0 software update on 2024 pickups. P2206 and P2207 are shorts low and high, P220E heater power out of range, P22A3 the downstream sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 05

Possible causes

  • Heater element in the NOx probe burnt through high
  • Broken conductor in the lead between probe and sensor module medium
  • Software anomaly (GM 3.0L LZ0 2024, bulletin 24-NA-094) low

Symptoms

  • Malfunction indicator lamp on after one trip
  • Upstream NOx sensor never becomes ready
  • SCR warning on the display

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2205

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication