OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21FD

Fuel Control System B Too Rich at Higher Load (Bank 1)

P21FD sets when the second fuel path on bank 1 is still rich at higher load although its learned correction has already taken away the permitted maximum. No manufacturer documents the code publicly. The FCA patent for port plus direct injection engines describes three separate monitors, one per injection mode, so a rich error that appears only while the port system fuels alone can be pinned on that system rather than reported as a general P0172. Possible causes are an air mass sensor reading high at large airflow, a regulator in the low-pressure circuit holding too much pressure, or port injectors that over-deliver at long opening times. Higher fuel consumption and sooty tailpipes may follow. P2192 is the system A counterpart, P21FF the bank 2 code.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / FD

Possible causes

  • Air mass sensor reading too high at large airflow medium
  • Low-pressure regulator holding too much pressure medium
  • Port injectors on bank 1 over-delivering low

Symptoms

  • Check engine lamp on
  • Increased consumption, sooty tailpipe

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21FD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication