OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21FB

Fuel Control System B Too Rich at Idle (Bank 2)

P21FB means bank 2's second fuel path is rich at idle while its correction already sits at the rich limit. The code requires an engine with a separate front sensor per bank and two injection paths; no maker documents it publicly. CARB section (e)(6.2.2) is the legal basis: once adaptive fuel control has used up the adjustment the manufacturer allows, a fault must be stored. Rich idle on one bank only typically comes from a port injector on that bank that leaks or sticks open, or from a bank 2 front sensor that reports too rich. If both banks show rich idle codes, look at shared items such as low-pressure regulation or fuel entering through crankcase ventilation. Fuel smell and a rough idle are possible; P2190 is the system A sibling.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / FB

Possible causes

  • Port injector on bank 2 leaking or sticking open medium
  • Bank 2 front oxygen sensor reading rich medium
  • Low-pressure regulation too high or fuel from crankcase ventilation (if both banks rich) low

Symptoms

  • Check engine lamp on
  • Rough idle and fuel smell

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21FB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication