P21FA
Fuel Control System B Too Lean at Idle (Bank 2)
P21FA is the bank 2 version of the idle lean check for the second fuel path. It applies to engines with two cylinder banks, a front oxygen sensor per bank and dual injection, such as Ford's 5.0 V8, which has combined port and direct injection since 2018. No manufacturer publishes this code; Ford monitors its port system per bank without separate idle cells and would store the fault as P2BF2. At idle the per-bank correction reacts strongly to small absolute errors, so a leak at bank 2's intake runners or gasket, or a partly blocked port injector on that side, are the first suspects while bank 1 stays clean. Drivers may notice an uneven idle or nothing beyond the warning lamp. The system A equivalent is P2189.
Possible causes
- Intake leak at bank 2 runners or gasket medium
- Partly blocked port injector on bank 2 medium
- Bank 2 front oxygen sensor reading lean low
Symptoms
- Check engine lamp on
- Uneven idle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P21FA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.