P21F7
Fuel Control System B Too Rich Off Idle (Bank 2)
P21F7 sets when the second fuel path on bank 2 has to remove more fuel above idle than its rich limit permits. It needs an engine with two banks, separate front sensors and dual injection; inline engines such as Audi's 2.5 TFSI only have the bank 1 codes. No manufacturer publishes criteria for P21F7. An FCA patent for port plus direct injection engines explains the idea behind such split codes: a fault seen while only one path is fuelling is assigned to that path, whereas a fault during mixed operation goes to a general code such as P0175. When only this bank is affected, a leaking port injector on bank 2 or a bank 2 front sensor that reads rich is plausible; if both banks are rich, check what they share, such as pressure regulation. P2180 is the system A counterpart.
Possible causes
- Leaking port injector on bank 2 medium
- Bank 2 front oxygen sensor reading rich medium
- Low-pressure regulation too high (if bank 1 also rich) low
Symptoms
- Check engine lamp on
- Increased fuel consumption
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P21F7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.