P21F3
Cylinder 12 Injector B Circuit High
P21F3 ends the B injector series of SAE J2012: a high signal on the cylinder 12 circuit, caused by a short to supply on the switched side. The series runs from P21CF to P21DA for opens and from P21DB to P21F3 for low/high pairs; the A injector equivalent here is P0295. Public manufacturer documents only reach cylinder 8 (GM's LT5 V8) or cylinder 4 (Mitsubishi), and no twelve-cylinder with dual injection could be documented, since Lamborghini's and Aston Martin's V12s use port injection alone. Should the code appear, the injector cannot open; cylinder 12 then relies on its other injector, and the driver stage takes the brunt of each switching attempt. GM's criteria for the same fault type serve as a guide: within 0.5 Ohm of power with the driver off. Low fault: P21F2.
Possible causes
- Control wire of the cylinder 12 B injector shorted to supply high
- Injector coil with shorted windings medium
- Driver stage damaged by a lasting short low
Symptoms
- Check engine light on
- Cylinder 12 lean or misfiring (P0312)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P21F3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.