OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21F2

Cylinder 12 Injector B Circuit Low

P21F2 is the generic code for a low circuit state, usually a grounded control wire, at the B injector of cylinder 12. It would need a twelve-cylinder engine with two injectors per cylinder, and none could be documented: the V12s from Lamborghini and Aston Martin inject into the ports only. No manufacturer publishes the code in this sense. One maker does use the number differently: McLaren bulletin KA-01931 lists P21F205 and P21F22F on the Artura, a V6 plug-in hybrid, as high-voltage battery faults (safety design current too low/high), repaired by replacing battery parts. On an Artura it is therefore a battery fault, not an injector fault. For a genuine injector fault, CARB's circuit monitoring applies, and GM's V8 criteria (ground short below 0.5 Ohm) are a guide. High fault: P21F3.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / F2

Possible causes

  • Cylinder 12 B injector wire shorted to ground high
  • Injector with internal ground fault medium
  • Manufacturer-specific use of the number (McLaren Artura high-voltage battery) low

Symptoms

  • Check engine light on
  • Misfire on cylinder 12 (P0312)
  • Hybrid warning instead, if the code is a McLaren battery fault

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21F2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication