P21E7
Cylinder 6 Injector B Circuit High
P21E7 is stored when the B injector of cylinder 6 shows a short toward power. GM's 2019 Corvette ZR1 with the LT5 V8 is the documented user; there the FICM checks the low side only in the driver-off state, flags 0.5 Ohm or less to power, and needs at least 11 V at the powertrain relay with the engine running. The result is a Type A fault after one trip. With the low side tied to supply, every switching attempt would push current straight into the driver, so the injector on the right-bank cylinder 6 delivers nothing. A useful check is to unplug the injector: if the voltage on the control wire stays, the harness is at fault; if it disappears, the injector coil is suspect. P21E6 is the matching low fault and P0277 the A injector high code.
Possible causes
- Cylinder 6 B injector control wire in contact with a live wire high
- Shorted turns in the injector coil medium
- Output stage of the injection control module damaged by the short low
Symptoms
- Check engine light on
- Lean condition on bank 2 under load
- Cylinder 6 misfire at high load
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P21E7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.