OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21E6

Cylinder 6 Injector B Circuit Low

P21E6 reports that the B injector circuit of cylinder 6 has found a path to ground. In GM's 2019 tables for the Corvette ZR1 LT5, cylinder 6 is the third position on the right bank, which GM counts as bank 2. The FICM samples the switched-off low side every 100 ms and needs 20 bad readings out of 25, so a solid fault is confirmed within about two and a half seconds; the limit is 0.5 Ohm or less toward ground, Type A. A ground on the low side completes the injector circuit whenever its feed is live, so fuel can enter cylinder 6 without a command. Typical traces are a rich bank 2, fuel-wetted spark plug on that cylinder and fuel trims at their lean limit. P21E7 is the high fault of the same injector, P0276 the low fault of the A injector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / E6

Possible causes

  • Cylinder 6 B injector harness chafed against engine metal high
  • Internal short to ground inside the injector medium
  • Injection control module output stuck low low

Symptoms

  • Check engine light on
  • Rich condition on bank 2, possibly fuel smell
  • Fouled spark plug or misfire on cylinder 6

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21E6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication