OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21E4

Cylinder 5 Injector B Circuit Low

P21E4 flags a low state on the circuit of the second (B) injector serving cylinder 5. The only public OBD summary that lists it is GM's for the 2019 Corvette ZR1, whose supercharged LT5 V8 pairs direct injectors with port injectors and drives the supplemental ones from a separate fuel injection control module (FICM). While that driver is off, a low side reading 0.5 Ohm or less toward ground in 20 of 25 samples, taken every 100 ms, is judged a short and becomes a Type A fault with the MIL in the first trip. On GM's V8 numbering cylinder 5 is the third cylinder of the left bank, i.e. bank 1. Because a grounded low side can let the injector flow uncommanded, a rich bank 1 may follow. Ford's dual-injection engines report B shorts on this cylinder only as P21D3.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / E4

Possible causes

  • Low-side wire of the cylinder 5 B injector touching ground high
  • Injector winding shorted to its housing medium
  • Moisture or corrosion in the injector connector medium
  • Driver stage in the injection control module faulty low

Symptoms

  • Check engine light on
  • Rich running or fuel trim pulled back on bank 1
  • Rough idle or misfire on cylinder 5

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21E4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication