OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21E3

Cylinder 4 Injector B Circuit High

P21E3 marks a high circuit state on the cylinder 4 B injector, normally a short to a supply line. On Mitsubishi's 2022 Eclipse Cross, where B is the direct high-pressure injector, the fault must persist 2 s; it closes the manual's list of direct injector circuit codes for the four cylinders. Because the direct injector driver uses boosted voltage, Mitsubishi tells technicians not to probe the terminals with a voltmeter and to work with resistance and continuity checks instead. GM's 2019 LT5 V8 assigns the same code to the supplemental injector of cylinder 4, stored as Type A when the low side sits within 0.5 Ohm of power with the driver off. The low counterpart is P21E2, the port injector high code on Mitsubishi P0271; from P21E4 on, the series continues with cylinder 5.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / E3

Possible causes

  • Cylinder 4 injector line shorted to a supply wire high
  • Injector of cylinder 4 shorted internally medium
  • Driver stage in the ECM or injection module damaged low

Symptoms

  • Check engine light on
  • Misfire on cylinder 4 (P0304)
  • Engine runs with reduced torque if further cylinders are affected

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21E3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication