P21E1
Cylinder 3 Injector B Circuit High
P21E1 is the high fault on the cylinder 3 B injector circuit. In Mitsubishi's 2022 Eclipse Cross that is the direct high-pressure injector, and the module reacts to a short circuit lasting 2 s, checked with 10 to 16.5 V battery voltage. To confirm a repair, the manual points to its OBD drive cycle pattern 1. GM's 2019 LT5 V8 monitors the low side of the supplemental cylinder 3 injector in its separate FICM module and flags under 0.5 Ohm toward power as Type A with the MIL in the first trip. A short to power keeps the low side from ever reaching ground, so the injector cannot open, and switching against the short can strain the driver stage. P21E0 covers the low fault and P0268 the port injector high fault on Mitsubishi; a cylinder 3 misfire often follows.
Possible causes
- Cylinder 3 injector line shorted to supply voltage high
- Shorted injector coil medium
- Damaged driver in the control module low
Symptoms
- Check engine light on
- Cylinder 3 not firing properly
- Torque reduction if several injectors fail (Mitsubishi)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P21E1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.