OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21DB

Cylinder 1 Injector B Circuit Low

P21DB means the drive circuit of the B injector on cylinder 1 is pulled toward ground. Two makers document it, with opposite meanings of B. Mitsubishi's 2022 Eclipse Cross uses B for the direct high-pressure injector (its port injector faults are P0261 ff.) and sets P21DB when an interruption or a grounded line persists for 2 s with 10 to 16.5 V battery and over 10 V on the injector driver supply. One faulty cylinder loses both its injectors; with several faults direct injection is switched off and the engine runs on port injection with limited torque. GM's 2019 LT5 V8 tests the low side of its supplemental B injector with the driver off: below 0.5 Ohm to ground in 20 of 25 samples, Type A. Ford covers B faults only with P21CF to P21D6, opens and shorts together. P21DC is the high counterpart, P21CF the open circuit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / DB

Possible causes

  • Injector wire chafed through to ground high
  • Injector winding open or shorted to its housing medium
  • Damaged intermediate or injector connector medium
  • Engine or injection control module faulty low

Symptoms

  • Check engine light on
  • Cylinder 1 misfire or shut-off
  • Reduced torque when several cylinders are affected (Mitsubishi)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21DB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication