OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21DA

Cylinder 12 Injector B Circuit/Open

P21DA closes the circuit/open series of the second injectors with cylinder 12. It requires a twelve-cylinder engine with two injectors per cylinder; no manufacturer documents this code publicly and no available source names such an engine using it. The fault type is the same as for its documented siblings: the control unit switches the injector and sees no current or an impedance far above normal. GM's LT5 injection module, for example, treats 200 kOhm or more as open and stores a Type A fault after 20 of 25 samples. CARB demands this kind of electrical monitoring for injectors. Directly after this code the series continues with the low and high faults P21DB and P21DC for cylinder 1; the A-side open code for cylinder 12 is P020C, the misfire code P0312.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / DA

Possible causes

  • Second injector of cylinder 12 with open coil high
  • Wire or terminal fault in the injector harness medium
  • Output stage of the controlling module failed low

Symptoms

  • Check engine light on
  • Misfire on cylinder 12 (P0312)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21DA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication