OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21D9

Cylinder 11 Injector B Circuit/Open

P21D9 is reserved for an open circuit of the second injector on cylinder 11 and therefore only makes sense on twelve-cylinder engines with dual injection. No manufacturer documents this code publicly, and no available source names a twelve-cylinder engine that uses it. Its meaning follows from the series: like P21CF to P21D6, it is an electrical check of the injector drive, not of fuel quantity. CARB requires such circuit monitoring for injectors whose failure affects emissions; Ford's documented B-injector check for up to eight cylinders runs continuously above 11 V and needs 5 s, which shows the typical scale. If it ever appears, check the injector coil resistance and the harness first. The direct counterpart in the A series is P020B, the misfire code for cylinder 11 is P0311.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / D9

Possible causes

  • Open coil in the second injector of cylinder 11 high
  • Damaged injector harness or loose plug medium
  • Faulty driver in the engine control module low

Symptoms

  • Check engine light on
  • Misfire on cylinder 11 (P0311)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21D9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication