OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21D8

Cylinder 10 Injector B Circuit/Open

P21D8 covers the second injector of cylinder 10, the last cylinder of a V10. No manufacturer documents this code publicly. A V10 with two injectors per cylinder is on record in the Lamborghini Huracán, whose engine combines direct and multipoint injection, yet which of them its software would call B is unknown. For comparison, Ford's eight-cylinder logic tests B circuits continuously above 11 V for 5 s, and GM's LT5 module rates an open by 200 kOhm or more with the driver off. CARB obliges makers to monitor injector output circuits whose failure can raise emissions. In practice the fault would show as a misfire on cylinder 10 (P0310) with that cylinder still fed by its other injector; the A-side equivalent would be P020A. Neighbours are P21D7 and P21D9.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / D8

Possible causes

  • Second injector of cylinder 10 open internally high
  • Wiring or connector fault at the cylinder 10 injector medium
  • Output stage in the engine control module failed low

Symptoms

  • Check engine light on
  • Misfire on cylinder 10 (P0310)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21D8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication