OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21D7

Cylinder 9 Injector B Circuit/Open

P21D7 would mark an open drive circuit of the second injector on cylinder 9, which presupposes at least nine cylinders. No manufacturer documents this code publicly; the published Ford and GM lists stop at cylinder 8 (P21D6). Engines with that many cylinders and two injection systems do exist, for example the V10 of the Lamborghini Huracán, which pairs direct with multipoint injection, but no source shows how its maker labels the two injectors. CARB requires that electrical output components such as fuel injectors be checked for circuit faults, so the logic would follow the documented siblings: a missing current or excessive impedance when the injector is switched. The direct injector of cylinder 9 would carry P0209 if it is the A side. A misfire on cylinder 9 (P0309) is the likely accompanying symptom.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / D7

Possible causes

  • Open coil in the second injector of cylinder 9 high
  • Broken wire or terminal in the injector harness medium
  • Driver stage in the engine control module failed low

Symptoms

  • Check engine light on
  • Misfire on cylinder 9 (P0309)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21D7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication