OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21D5

Cylinder 7 Injector B Circuit/Open

P21D5 belongs to V8 engines with a second injector per cylinder. Two are documented: Ford's 5.0 V8, which gained direct injection alongside its port injectors in 2018, and GM's 2019 LT5, the supercharged Corvette ZR1 engine with primary direct and supplemental port injection. Ford's summary lists P21CF to P21D6 as port injector circuits, continuous above 11 V, 5 s. On the LT5 the B injectors hang on a separate injection module whose low-side driver flags an open at 200 kOhm or more with the output off, in 20 of 25 samples at 100 ms, Type A with MIL in one trip. Ford counts its V8 one bank after the other, so cylinder 7 lies on the second bank; GM alternates banks, making 7 the last cylinder on the left. The A-side code for cylinder 7 is P0207, the misfire code P0307.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / D5

Possible causes

  • Open winding in the cylinder 7 port injector high
  • Broken wire or terminal in the port injector harness of that bank medium
  • Separate fuel injection control module faulty (GM LT5) low

Symptoms

  • Check engine light on
  • Misfire on cylinder 7, on the LT5 mostly under high load
  • Reduced power at full throttle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21D5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication