OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21D4

Cylinder 6 Injector B Circuit/Open

P21D4 is the last B injector code on a six-cylinder engine. Ford's second-generation 2.7 and 3.5 EcoBoost V6 combine port and direct injection, label the port injectors B and test this circuit together with P21CF to P21D3, continuously above 11 V within 5 s; on these engines cylinder 6 is the rear cylinder of the second bank. On the 3.5 the direct system is shut down at low speed and light load and the engine runs on port fuel alone, so an open cylinder 6 port injector is most noticeable at idle and in gentle driving. GM's 2019 LT5 V8 also covers cylinder 6 in its injection module, Type A after 20 of 25 failed samples. The A-side direct injector code is P0206, the misfire code P0306; P21E6 and P21E7 are the low and high faults.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / D4

Possible causes

  • Port injector of cylinder 6 open internally high
  • Damaged wire at the rear of the engine, hard to inspect medium
  • Connector not fully latched after earlier work on the intake medium

Symptoms

  • Check engine light on
  • Misfire on cylinder 6 (P0306)
  • Slightly rough idle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21D4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication