OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21D0

Cylinder 2 Injector B Circuit/Open

P21D0 is the open-circuit code for the B injector of cylinder 2. Where that cylinder sits varies: GM's small-block V8 alternates odd and even numbers between the banks, so cylinder 2 opens the right bank, while Ford's V6 and V8 count one bank first and place it next to cylinder 1. Ford defines B as the port injector, the direct injector being A with P0202. Ford runs the check in every engine with combined port and direct injection, from the three-cylinder 1.5 to the 5.0 V8, continuously at 11 V or more for 5 s. GM's LT5 injection module samples the circuit every 100 ms once the powertrain relay supplies at least 11 V. On engines that run on port fuel alone at light load, like Ford's second 3.5 EcoBoost, the cylinder then misfires mostly at idle. Low and high faults are P21DE and P21DF.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / D0

Possible causes

  • Port injector of cylinder 2 with an open winding high
  • Broken wire or pushed-back terminal in the injector harness medium
  • Output stage in the engine or injection module failed low

Symptoms

  • Check engine light on
  • Misfire on cylinder 2, mainly at idle and light load
  • Code P0302 stored as well

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21D0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication