OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21CD

Reductant Quality Module Supply Voltage Low

The DEF quality module measures the urea concentration in the tank and, on many tanks, shares a housing with the level sensor. P21CD reports that its supply voltage is too low. Ford's 2023 diesel summary sets the code when the quality sensor supply falls below 10 V or rises above 20 V for 15 s, so on Ford the overvoltage case shares this code. Ford bulletin 19-2315 covers 2017 to 2019 Super Duty trucks with the 6.7 L diesel built up to 1 August 2018: water enters the four-pin connector C4851 at the level and quality module, corroding pins 1 and 4, and P21CD appears together with U02A2. The fix is a new tank harness, sometimes the tank. Without a valid quality reading the SCR system cannot verify the fluid, and P206B to P206D cannot run.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / CD

Possible causes

  • Water and corrosion in the quality module connector (Ford C4851) high
  • Damaged tank harness or supply wire medium
  • Low battery or charging voltage medium
  • Quality module internally faulty low

Symptoms

  • Check engine light on
  • DEF quality or level warning in the instrument cluster
  • Communication code for the quality module stored as well

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21CD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication